Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. : Smt 990

How to Remove the Front Headlight on a KTM SMT 990

Model: Ktm Smt 990
Part: Headlight

Video tutorial

In this video, we will go through the steps to remove the front headlight on a KTM SMT 990 motorcycle, following the instructions below. First, unscrew the fixing screws found on the front headlight using a set of Torx screwdrivers; then unscrew the screws located on the inside of the headlight, as illustrated in the video.

At this point, remove any fairing to unscrew the screws of the headlight located underneath; now simply remove it by disconnecting and removing the bulb. Apply the reverse procedure for reassembly!


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on the KTM SMT 990
How to Replace the Front Brake Pads on the KTM SMT 990
Smt 990 To replace the front brake pads on the KTM SMT 990, you need to unscrew the screws that secure the pads within the corresponding caliper: once these …

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos