Do it yourself
Frequently asked questions about cars and motorcycles
Turn on the motorcycle's instrument panel by pressing the grey button with the key symbol located on the right side of the handlebar. Move to the left side and press the "set" button to enter the menu, then use the buttons on the left side of the menu to scroll through the options until you reach the service options. Once here, to select this option, press and hold the "up" and "down" buttons simultaneously for a few seconds to open the service window. Set the service interval by changing the mileage or months as needed, then exit the menu.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Super Adventure 1290 Begin by warming up the engine of your KTM Super Adventure 1290, letting it run for a few minutes. Then, unscrew the lower oil drain plug and wait fo…
Super Adventure 1290 In this guide, you will learn the procedure to carry out the routine maintenance service by changing the engine oil and oil filter on the KTM Super A…
Super Adventure 1290 To replace the exhaust on the KTM Super Adventure 1290, you need to remove the protective panel located above the exhaust by unscrewing the correspon…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos