Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Let’s briefly go through the steps necessary to remove and replace the starter motor on a KTM Duke 250 motorcycle. First, remove the seat and disconnect the battery by removing the positive terminal. Next, locate the starter motor situated behind the engine block, as shown in the video. Disconnect the starter motor cables by unscrewing the nuts and unplugging the electrical connector. Unscrew the mounting screws to remove it and replace it with the new one, applying the reverse procedure!

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a KTM Duke 250?
How to Replace the Battery in a KTM Duke 250?
Duke 250 In this tutorial, we will see how to replace the battery in a KTM Duke 250, a very simple and quick operation. First, ensure that the instrument clus…
How to Replace the Rearview Mirror on the KTM Duke 250?
Duke 250 To replace the rearview mirror on the KTM Duke 250, use a spanner to loosen the nut located at the base: once this nut is loosened, grasp the mirror …
How to Replace the Rear Brake Pads on a KTM Duke 250?
How to Replace the Rear Brake Pads on a KTM Duke 250?
Duke 250 In this tutorial, you will see how to replace the rear brake pads on a KTM Duke 250, a very simple and quick operation. First, position yourself in f…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos