Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Rc 200
Part: Headlight bulb

In this tutorial, you will see how to replace the front headlight bulbs in the KTM RC 200, a very simple and quick operation. First, ensure that the key is not inserted to operate safely, then locate the cap at the back of the headlight in question, remove it, grasp the bulb holder, and turn it counterclockwise to extract it from the housing. Next, disconnect the old bulb from the connector, connect the replacement, and reassemble everything by following the reverse procedure. Repeat the operation on the opposite side if necessary.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulbs on the KTM RC 200?
How to Replace the Headlight Bulbs on the KTM RC 200?
Rc 200 As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not i…
How to replace the front headlight bulbs in the KTM RC 390?
How to replace the front headlight bulbs in the KTM RC 390?
Rc 200 In this tutorial, we can see how to replace the front headlight bulbs in the KTM RC 390, an extremely simple and quick operation. First of all, make …
How to Replace the Rear View Mirror on a KTM RC 200?
How to Replace the Rear View Mirror on a KTM RC 200?
Rc 200 To replace the rear view mirror on a KTM RC 200, loosen the two screws located on the side of the front fairing: these screws should be loosened usin…

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos