|
Do it yourself
| |||
| ||||
Model: Ktm Rc 390
To change the engine oil of the KTM RC 390, loosen the drain plug located at the bottom centre of the bike. Once loosened, collect all the used oil in a suitably positioned container. Additionally, on the left side of the bike, you will find the oil filter, which can be removed from its housing and replaced with a new one. After removal, top up the oil through the breather located on the left side of the bike.
Updated on 6 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Rc 390
In this tutorial, learn how to change the engine oil in the KTM RC 390, a very simple and quick operation. First, ensure the engine is cool enough to…
Rc 390
To change the engine oil on the KTM RC 390, loosen the drain plug located at the bottom centre of the bike. Once the plug is loosened, collect the us…
Rc 390
As seen in this tutorial, changing the engine oil in a KTM RC 390 is an extremely simple and quick operation. First, wait for the engine to cool down…
|
How to Replace the Engine Cover on a Honda CB 650R
This guide provides instructions for removing and replacing the engine cover on a Honda CB 650R motorcycle, following these simple steps. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Then, unscrew all the screws from the cover or engine casing found on the right, as shown in the video. At this point, install the new cover, ensuring to replace the gasket and clean the base thoroughly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
