Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on the Kymco Downtown 350?

Model: Kymco Downtown 350
Part: Exhaust muffler

Video tutorial

The procedure for replacing the exhaust on the Kymco Downtown 350 involves loosening the screws that secure the component to its supports at the rear of the exhaust itself. Next, loosen the bolt on the clamp that connects the exhaust to the rest of the exhaust pipe.

This will allow the tailpipe to be completely removed, so that the new one can be installed. Position the new exhaust at the end of the exhaust pipe, securing it to its supports and reinserting the clamp to connect it to the manifold.


Updated on 19 October 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on a Kymco Downtown 350
How to Replace the Exhaust on a Kymco Downtown 350
Downtown 350 To replace the exhaust on a Kymco Downtown 350, first loosen the bolts securing the part to the respective supports at the rear of the exhaust. At th…
How to Reset the Service Light on the Kymco Downtown 350
How to Reset the Service Light on the Kymco Downtown 350
Downtown 350 This video shows the procedure to reset the maintenance light on the Kymco Downtown 350. The process is simple and takes little time. To reset it, fi…
Replacing the Battery on the Kymco Downtown 350
Replacing the Battery on the Kymco Downtown 350
Downtown 350 Here are the instructions to remove and replace the battery of the Kymco Downtown 350 scooter in simple and quick steps. First, place the scooter on …

How to Replace the Spark Plug on a Honda Dio Scooter?

In this tutorial, see how to replace the spark plug on a Honda Dio scooter, a very simple and quick operation. First, ensure the engine is cool enough to work safely, then open the seat and, by unscrewing all the indicated screws, remove the entire internal plastic frame. Next, disconnect the spark plug power connector, grasp the spark plug with the appropriate socket spanner, and unscrew it. At this point, simply insert the replacement, tighten it gently, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos