Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery on the Kymco Downtown 350

Model: Kymco Downtown 350
Part: Battery

Video tutorial

Here are the instructions to remove and replace the battery of the Kymco Downtown 350 scooter in simple and quick steps. First, place the scooter on its centre stand and begin by opening and lifting the seat; then locate the battery compartment under the seat, where you will disconnect both terminals (positive and negative) to remove it, as shown in the video.

At this point, install the new battery of the correct type and with the same amperage; connect the electrical terminals and test the engine start!


Updated on 13 September 2026 by ScegliAuto


Related tutorials

How to Service the Kymco Downtown 350
How to Service the Kymco Downtown 350
Downtown 350 Today, let's look at the instructions that will allow you to perform a complete service on the Kymco Downtown 350 scooter. First, place the scooter o…
How to set the time on a Kymco Downtown 350 scooter?
How to set the time on a Kymco Downtown 350 scooter?
Downtown 350 In this tutorial, you will see how to set the time on a Kymco Downtown 350 scooter, a very simple and quick operation to perform, for example, after …
How to change the engine oil of the Kymco Downtown 350?
How to change the engine oil of the Kymco Downtown 350?
Downtown 350 To change the engine oil of the Kymco Downtown 350, loosen the drain plug located at the central lower part of the scooter so that all the used oil c…

How to Replace the Spark Plug on a Honda Dio Scooter?

In this tutorial, see how to replace the spark plug on a Honda Dio scooter, a very simple and quick operation. First, ensure the engine is cool enough to work safely, then open the seat and, by unscrewing all the indicated screws, remove the entire internal plastic frame. Next, disconnect the spark plug power connector, grasp the spark plug with the appropriate socket spanner, and unscrew it. At this point, simply insert the replacement, tighten it gently, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos