Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the exhaust of the Kymco K-XCT, you need to loosen the screw that fixes the exhaust terminal to its housing located near the rear wheel, on the right side of the motorcycle: once the exhaust supports have been loosened, it will be possible to proceed by widening the ring that connects it to the exhaust manifold so that the old exhaust can be completely detached. The new one can then be inserted, so that it is fixed to the corresponding supports and connected to the manifold, making sure that everything works correctly.

Posted on 21 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Kymco K-xct 125 Scooter
How to Reset the Service Light on a Kymco K-xct 125 Scooter
K Xct In this video, you will see how to reset the oil light on a Kymco K-xct 125: turn on the ignition, and you will see that the oil light is on. On the …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos