Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Kymco K-xct 125 Scooter

Model: Kymco K Xct
Part: Service warning light

Video tutorial

In this video, you will see how to reset the oil light on a Kymco K-xct 125: turn on the ignition, and you will see that the oil light is on. On the left side of the instrument panel, there are two buttons: you need to press the one closest to the speedometer.

Hold it down for a few moments until a small symbol appears under the 'trip' label.

Release the button and press it again; you will notice that its position changes. Now press both buttons on the left side of the instrument panel simultaneously.

The symbol has disappeared and the oil light has turned off. Turn off the ignition and turn it back on to verify. Task completed.


Updated on 12 September 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on the Kymco K-XCT
How to Replace the Exhaust on the Kymco K-XCT
K Xct To replace the exhaust on the Kymco K-XCT, loosen the bolt that secures the exhaust end can to its housing located near the rear wheel on the right s…

How to Change the Engine Oil in a Harley-Davidson Milwaukee Eight Softail?

In this tutorial, learn how to change the engine oil in a Harley-Davidson Milwaukee Eight Softail, a very simple and quick operation. First, ensure the engine is cool enough, then position a container underneath and remove the dipstick. Next, unscrew the drain plug, allow all the oil in the system to drain out, and proceed to remove the old filter. At this point, tighten the replacement filter, reassemble everything, and add the required amount of oil through the designated opening.

Watch the video!


by ScegliAuto

More videos