Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the air filter of the Kymco People GT 125, you need to loosen the screws that secure the cover of the filter box, located near the rear wheel on the left side of the motorcycle. Once the cover has been freed and removed, you can proceed to locate the underlying filter that needs to be replaced. After the old filter has been removed, you can insert the new one; finally, cover everything with the lid to ensure that everything is functioning correctly.

Posted on 26 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on a Kymco People GT 125?
How to Replace the Exhaust on a Kymco People GT 125?
People Gt 125 To replace the exhaust on a Kymco People GT 125, loosen all the screws that secure the exhaust on the rear side of the motorcycle so that it can be r…
How to Remove the Injector from the Kymco People GT 125
How to Remove the Injector from the Kymco People GT 125
People Gt 125 Below are the main instructions on how to remove and replace the fuel injector of the Kymco People GT 125 scooter. First, place the scooter on the st…
How to Replace the Exhaust on the Kymco People GTI 125?
How to Replace the Exhaust on the Kymco People GTI 125?
People Gt 125 To replace the exhaust on the Kymco People GTI 125, loosen the bolts securing the old exhaust to the supports. Next, loosen the bolt on the clamp tha…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos