Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the headlight bulb of the Harley Davidson Road King?

Model: Harley Davidson Road King
Part: Headlight bulb

Video tutorial

To replace the headlight bulb on the Harley Davidson Road King, you need to loosen the screw located at the bottom of the chrome trim around the headlight. Once this screw is removed, you can widen the chrome trim and remove it completely.

This will allow you to remove the headlight from its housing and remove the bulb inside. After removing the old bulb, you can insert and connect the new one to its housing, then secure everything with the screw that was just removed.


Posted on 3 January 2025 by ScegliAuto


Related tutorials

How to Replace the Headlamp Bulb on a Harley Davidson Road King
How to Replace the Headlamp Bulb on a Harley Davidson Road King
Road King To replace the headlamp bulb on a Harley Davidson Road King, loosen the screw located at the bottom of the chrome trim surrounding the headlamp. Once…
How to Replace the Headlight Bulb on a Harley Davidson Road King
Road King To replace the headlight bulb on a Harley Davidson Road King, loosen the screw located at the bottom of the chrome trim surrounding the headlight. On…
How to Replace the Headlight and Bulb on a Harley Davidson Road King
How to Replace the Headlight and Bulb on a Harley Davidson Road King
Road King This guide shows how to disassemble and replace the headlight and bulb on a Harley Davidson Road King, following these simple steps. First, remove th…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos