Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the headlight bulb on a Harley Davidson Road King, loosen the screw located at the bottom of the chrome trim surrounding the headlight. Once this screw is removed, you can widen the trim and remove it completely. This will allow you to pull the headlight out of its housing and extract the bulb inside. After removing the old bulb, insert and connect the new one to its housing, then secure everything with the previously removed screw.

Updated on 8 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Headlight and Bulb on a Harley Davidson Road King
How to Replace the Headlight and Bulb on a Harley Davidson Road King
Road King This guide shows how to disassemble and replace the headlight and bulb on a Harley Davidson Road King, following these simple steps. First, remove th…
How do you replace the headlight bulb of the Harley Davidson Road King?
How do you replace the headlight bulb of the Harley Davidson Road King?
Road King To replace the headlight bulb on the Harley Davidson Road King, you need to loosen the screw located at the bottom of the chrome trim around the head…
How to Replace the Headlamp Bulb on a Harley Davidson Road King
How to Replace the Headlamp Bulb on a Harley Davidson Road King
Road King To replace the headlamp bulb on a Harley Davidson Road King, loosen the screw located at the bottom of the chrome trim surrounding the headlamp. Once…

How to Remove the Oil Warning Light on the Sym MaxSym 500 TL Scooter?

In this tutorial, we will see how to remove the oil warning light on the Sym MaxSym 500 TL scooter. This simple and quick operation should only be performed after completing the scheduled maintenance tasks. First, insert the key and turn on the instrument panel, then scroll through the screens using the lower left button until you reach the service interval screen. At this point, press the upper button once to start the reset procedure, and a second time to complete it. Restart the scooter afterwards and check that the operation was successful.

Watch the video!


by ScegliAuto

More videos