Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Variator and Belt on a Peugeot Speedfight 3

Model: Peugeot Speedfight 3
Part:

Video tutorial

In today's tutorial video, you will see the steps to dismantle and replace the variator and drive belt on the Peugeot Speedfight 3 scooter. First, place your scooter on the centre stand and start unscrewing the fixing screws located on the sides of the transmission cover.

Next, unscrew the nut of the fan and the clutch bell to remove them, as shown in the video. At this point, remove the belt and variator, replacing the rollers if necessary.

Then, reassemble the transmission, following the tutorial video to the end!


Updated on 8 July 2026 by ScegliAuto


Related tutorials

How to Remove the Variator and Clutch on Peugeot Speedfight 3
How to Remove the Variator and Clutch on Peugeot Speedfight 3
Speedfight 3 In this video, follow the steps to remove the variator and clutch pack from a Peugeot Speedfight 3 scooter. First, remove the clutch cover by unscrew…
How to replace the transmission on the Peugeot Speedfight 3?
How to replace the transmission on the Peugeot Speedfight 3?
Speedfight 3 To replace the transmission on the Peugeot Speedfight 3, loosen the screws that secure the cover located near the rear wheel, on its left side: once …
How to Replace the Drive Belt on the Peugeot Speedfight 3
How to Replace the Drive Belt on the Peugeot Speedfight 3
Speedfight 3 Today's guide will show you the steps to remove and replace the drive belt on the Peugeot Speedfight 3 scooter. First, place your scooter on the cent…

How to Change the Transmission Oil on a Piaggio Vespa GTS Scooter

In this tutorial, you will see how to change the transmission oil on a Piaggio Vespa GTS scooter, a very simple operation applicable to all engine sizes. First, wait until the engine is completely cold, then position a container underneath the transmission area and, using a 6 mm hex socket spanner, unscrew the drain plug. Allow all the oil contained in the casing to drain out, reinsert the plug, and add the necessary amount of oil through the upper hole. You can use a pump or a syringe to assist with this.

Watch the video!


by ScegliAuto

More videos