Do it yourself
Frequently asked questions about cars and motorcycles
You can replace the rear brake pads on the Ducati Monster 796 by loosening the screws that secure the brake caliper to its housing: this should then be detached from the top of the disc to allow the pin that holds the pads in place to be removed. Once the pads are freed, you can detach them from the caliper and position the new ones: these can now be secured with the pin, and the caliper can be reinstalled onto the disc by fastening it with the screws.

Posted on 27 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Monster 796 In order to replace the front brake pads of the Ducati Monster 796, you need to loosen the screws that secure the brake caliper to the corresponding …
Monster 796 In this tutorial, you will learn how to set the time on a Ducati Monster 796, a very simple and quick operation, for example, after replacing the bat…
Monster 796 This guide outlines how to remove and replace the battery of the Ducati Monster 796 motorcycle. First, place the bike on a stand and start unscrewing…

How to Change the Engine Oil on an MV Augusta Brutale 1090

To change the engine oil on an MV Augusta Brutale 1090, it is important to follow some essential steps. Ensure the engine is cold. Safely lift the bike using a centre or side stand. Position a container under the sump plug to collect the used oil. Remove the sump plug and completely drain the used oil. Once the oil has drained, replace the sump plug. Add new oil through the oil filler, using the type and quantity recommended in the owner's manual. Check the oil level and add more if necessary. Ensure the oil cap is securely closed. Start the engine and let it run for a few minutes to allow the oil to circulate. Finally, check the oil level again and adjust if necessary. Always pay attention to safety during motorcycle maintenance and dispose of used oil properly.

Watch the video!


by ScegliAuto

More videos