Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt of the Ducati Monster 796

Model: Ducati Monster 796
Part:

This video is currently unavailable

The steps illustrated in this guide will show us the process of disassembling and replacing the timing belt of the Ducati Monster 796 motorcycle. First of all, we put the motorcycle on the stand and start unscrewing the screws of the distribution cover, located on the right side; then we take the necessary references for the disassembly of the belt, in order to remove it, as shown in the video.

At this point, we install the new original timing belt, performing the timing; finally, we reassemble the cover, following the video tutorial to the end!


Posted on 6 September 2025 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Ducati Monster 796?
How to Replace the Front Brake Pads on a Ducati Monster 796?
Monster 796 To replace the front brake pads on a Ducati Monster 796, loosen the bolts securing the brake caliper to the corresponding disc, allowing you to detac…
How to replace the starter motor on the Ducati Monster 796?
How to replace the starter motor on the Ducati Monster 796?
Monster 796 To replace the starter motor on the Ducati Monster 796, loosen the screws located at the bottom left of the bike that secure the cover in this positi…
Replacing the battery of the Ducati Monster 796
Replacing the battery of the Ducati Monster 796
Monster 796 This guide outlines how to remove and replace the battery of the Ducati Monster 796 motorcycle. First, place the bike on a stand and start unscrewing…

How to Replace the Rear Brake Pads on a Derbi Senda 125?

To replace the rear brake pads on a Derbi Senda 125, loosen the nut that secures the central axle of the rear wheel so that it can be completely removed from its housing. Once the wheel is removed, you can slide out the pin that secures the pads inside the brake caliper and remove them from their housing. After the old pads have been removed, insert the new replacement parts, securing them with the pin. Finally, reinstall the rear wheel, positioning it at the end of the swingarm.

Watch the video!


by ScegliAuto

More videos