Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the engine oil in the Suzuki GSXR 600, an extremely simple and quick operation. First of all, we wait for the engine to be sufficiently cold, then we position a container under the motorcycle and remove the lower left fairing. We then locate the drainage hole bolt with a 17mm socket wrench, let all the oil in the system drain out, and then continue by unscrewing the old filter. At this point, all that remains is to tighten both the replacement filter and the bolt and pour in the new oil through the appropriate hole.

Posted on 29 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to start a Suzuki GSXR 600
How to start a Suzuki GSXR 600
Gsxr 600 Before you can start, sit on the seat of your Suzuki GSXR 600. Begin by inserting the key into the ignition switch and turning it clockwise. Next, pu…
How to change the engine oil in the Suzuki GSXR 600?
How to change the engine oil in the Suzuki GSXR 600?
Gsxr 600 In this tutorial, you will see how to change the engine oil in the Suzuki GSXR 600, a very simple and quick operation. First, wait until the engine i…
How to Remove the Rider Seat of a Suzuki GSXR 600
How to Remove the Rider Seat of a Suzuki GSXR 600
Gsxr 600 Before you begin, it is advisable to position your Suzuki GSXR 600 vertically for easier access to the seat. Start by removing the side covers around…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos