Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the float of the Kymco Agility, we first need to lift the seat, remove the helmet compartment, and the engine inspection cover, removing all the screws that hold it fixed to the body; then disconnect the float cap from the tank, and remove the float, pulling it out of the tank. Clean the edge with absorbent paper. We can find the new float, for example, on E-Bay with code 286700978131 at a price of 51.97 euros, + 6.00 euros delivery. Install the rubber gasket and then put the new float in the tank. Connect the electric plug and then we can install the engine inspection cover, and the helmet compartment. We can also put the seat back in place. The job is done.

Posted on 21 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Diaphragm of the Kymco Agility 125 Carburettor
How to Replace the Diaphragm of the Kymco Agility 125 Carburettor
Agility 125 Today, see the instructions that will allow you to remove and replace the diaphragm of the carburettor on the Kymco Agility 125 scooter. First, place…
In the Kymco Agility 125, where are the fuses located?
In the Kymco Agility 125, where are the fuses located?
Agility 125 The Kymco Agility 125 scooter is very similar to the majority of scooters on the market, as it has a battery and fuse arrangement under the footboard…
How to Change the Engine Oil in the Kymco Agility 125 Scooter
How to Change the Engine Oil in the Kymco Agility 125 Scooter
Agility 125 In this tutorial, you will see how to change the engine oil in the Kymco Agility 125 scooter, an extremely simple and quick operation. First, ensure …

How to Replace the Front Headlight Bulb on the Suzuki GS 500?

In this tutorial, you will see how to replace the front headlight bulb on the Suzuki GS 500, a very simple and quick operation. Before proceeding, ensure that the key is not inserted to operate safely. Start by positioning yourself in front of the headlight in question, then locate the two screws at the bottom and unscrew them with a cross-head screwdriver. Next, separate the headlamp from the bracket, disconnect the power connector, and remove the rubber cap. At this point, simply unclip the metal clip, extract the old bulb, and fit the replacement.

Watch the video!


by ScegliAuto

More videos