Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plug of the Kymco Agility 125

Model: Kymco Agility 125
Part: Spark plugs

Today we will see the instructions that will allow us to remove and replace the spark plug of the Kymco Agility 125 scooter. First, place the scooter on its centre stand and start by removing the plastic cover located under the seat, behind the footwell; then disconnect the coil connector, using a socket wrench with an extension to unscrew the spark plug from the cylinder head, as illustrated in the video. At this point, install the new spark plug, of the correct type and with the same thread pitch; screw in the spark plug by hand and then tighten gently with the wrench, before starting the engine!

Posted on 7 October 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the spark plug of the Kymco Agility 125.
How to replace the spark plug of the Kymco Agility 125.
Agility 125 Let's see the useful information on how to disassemble and replace the spark plug of the Kymco Agility 125 scooter engine. First, we place the scoote…
How to Replace the Diaphragm of the Kymco Agility 125 Carburettor
How to Replace the Diaphragm of the Kymco Agility 125 Carburettor
Agility 125 Today, see the instructions that will allow you to remove and replace the diaphragm of the carburettor on the Kymco Agility 125 scooter. First, place…
How do you replace the exhaust pipe of the Kymco Agility 125?
How do you replace the exhaust pipe of the Kymco Agility 125?
Agility 125 In order to replace the exhaust pipe of the Kymco Agility 125, you need to loosen the screws that hold it to the appropriate supports near the rear w…

How to Replace the Front Headlight on a Suzuki SV 650?

To replace the front headlight on the Suzuki SV 650, loosen the fixing screw located at the lower side. Once this screw is loosened, you can completely detach the headlight from its housing by disconnecting the connectors inside. After the cables are disconnected, remove the headlight completely and then loosen the screws that secure the chrome trim around it. This trim can be fitted onto the new replacement part, followed by properly securing and connecting the new headlamp unit.

Watch the video!


by ScegliAuto

More videos