Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the time on the Kymco Sky Town scooter?

Model: Kymco Sky Town
Part: Clock

Video tutorial

In this tutorial we can see how to adjust the time on the Kymco Sky Town scooter, an extremely simple and quick operation, to be carried out for example after the switch to daylight saving time or after disconnecting the battery. First of all, insert the key, then turn on the instrument panel and hold down both buttons located in the center of the dashboard for the necessary time for the clock to start flashing.

Adjust the time using the "ADJ" button, move on to the minutes with the "MODE" button and adjust them as well. To save the setting, simply wait a few seconds.


Posted on 16 November 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Kymco Sky Town 150 Scooter?
How to Change the Engine Oil on the Kymco Sky Town 150 Scooter?
Sky Town In this tutorial, you will learn how to change the engine oil on the Kymco Sky Town 150 scooter, a very simple and quick operation. First, ensure tha…
How to replace the transmission oil in the Kymco Sky Town 150 scooter?
How to replace the transmission oil in the Kymco Sky Town 150 scooter?
Sky Town In this tutorial, we will see how to replace the transmission oil in the Kymco Sky Town 150 scooter, a very simple and quick operation. First of all,…
How to reset the service light on the Kymco Sky Town
How to reset the service light on the Kymco Sky Town
Sky Town To manually reset the service light on your Kymco Sky Town, simply follow these steps and apply them in the correct order. First of all, turn on the …

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos