Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To manually reset the service light on your Kymco Sky Town, simply follow these steps and apply them in the correct order. First of all, turn on the ignition and locate the two buttons located below the display, namely "Mode" and "Adj". At this point, hold down the "Mode" button for a couple of seconds, then release it and press it several times until the word "ODO" appears on the right side of the display. Then hold down the "Adj" button until the service light reset is complete. Finally, turn off the central panel of your Kymco Sky Town and you are done.

Posted on 28 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Kymco Sky Town
How to reset the service light on the Kymco Sky Town
Sky Town Performing the service light reset on the Kymco Sky Town is a simple and quick operation to be carried out after completing the maintenance operation…
How do you replace the engine oil of the Kymco Sky Town?
How do you replace the engine oil of the Kymco Sky Town?
Sky Town It will be possible to perform the oil change on the Kymco Sky Town by loosening the drain plug located in the central lower part of the motorcycle: …
How to Change the Engine Oil on the Kymco Sky Town 150 Scooter?
How to Change the Engine Oil on the Kymco Sky Town 150 Scooter?
Sky Town In this tutorial, you will learn how to change the engine oil on the Kymco Sky Town 150 scooter, a very simple and quick operation. First, ensure tha…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos