Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to change the engine oil in the Kymco Agility 125 scooter, an extremely simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the scooter, locate the drain hole bolt, and unscrew it using a 17mm socket. Allow all the oil in the system to drain out, remove the filter, and clean it of any dirt residue. At this point, simply reassemble everything and add the required amount of oil through the designated hole.

Posted on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on the Kymco Agility S 125 Scooter?
How to Change the Engine Oil on the Kymco Agility S 125 Scooter?
Agility 125 In this tutorial, you will see how to change the engine oil on the Kymco Agility S 125 scooter, a very simple and quick operation. First, ensure that…
How to Replace the Engine Oil and Air Filter on a Kymco Agility 125
How to Replace the Engine Oil and Air Filter on a Kymco Agility 125
Agility 125 Today we will discover the instructions that will allow us to replace the engine oil and air filter of the Kymco Agility 125 scooter, performing rout…
How do you change the engine oil of the Kymco Agility 125?
How do you change the engine oil of the Kymco Agility 125?
Agility 125 To ensure that the engine oil of the Kymco Agility 125i is replaced, you will need to loosen the drain plug of the oil pan, which will be located in …

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos