Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Guide for changing the engine oil of a Kymco 125 Agility scooter. Obtain one litre of Kymco 4t 10w40 oil. Position the scooter on the centre stand. Start the scooter and let it run for a few minutes, then switch off. Place a container under the engine casing to collect the oil for disposal. Using a ratchet and a 16mm socket, unscrew the oil drain plug located at the bottom, on the left side of the engine. The plug is at the height of the centre stand spring. Clean the threads thoroughly and allow all the engine oil to drain out. Then, screw the plug back in until tight (be careful not to overtighten). Open the oil filler cap located on the right side of the casing, near the exhaust silencer, and add 900ml of SAE 10w40 oil.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Gear Oil Change for the Kymco Agility 125
Engine Oil and Gear Oil Change for the Kymco Agility 125
Agility 125 Discover how to perform routine maintenance by changing the engine oil and gear oil on the Kymco Agility 125 scooter. First, place the scooter on its…
How to change the engine oil on a Kymco Agility 125 scooter?
How to change the engine oil on a Kymco Agility 125 scooter?
Agility 125 In this tutorial, you can see how to change the engine oil on a Kymco Agility 125 scooter, a very simple and quick operation to perform every 12 mont…
How to Change the Engine Oil in the Kymco Agility City 125?
How to Change the Engine Oil in the Kymco Agility City 125?
Agility 125 The method for replacing the engine oil on a scooter, in this case the Kymco Agility City 125, is similar to that used in cars. The difference lies i…

How to Replace and Install the Front Wheel on a Beta RR 300

Today, we will go through the instructions to install or replace the front wheel on the Beta RR 300 enduro bike by following these simple steps. First, place your bike on a stand and lift the front wheel off the ground. Next, unscrew the fixing bolts of the front brake caliper to remove it. At this point, unscrew the central axle of the wheel, removing and possibly replacing the tyre. Then, tighten the fork nuts and reassemble everything by reversing the disassembly procedure!

Watch the video!


by ScegliAuto

More videos