Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you can see how to change the engine oil on a Kymco Agility 125 scooter, a very simple and quick operation to perform every 12 months. First, wait until the engine is sufficiently cool, then position a container underneath it. Locate the bolt in the lower left area and, using a 17mm spanner, completely unscrew it. Allow all the oil in the system to drain out, open the filter housing, and proceed with its replacement. At this point, you can reassemble everything and insert the new oil through the designated hole.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on the Kymco Agility 125 Scooter?
How to Change the Engine Oil on the Kymco Agility 125 Scooter?
Agility 125 In this tutorial, you will learn how to change the engine oil on the Kymco Agility 125 scooter, a simple task to perform every 3,000 miles. First, en…
How to Change the Engine Oil on the Kymco Agility
How to Change the Engine Oil on the Kymco Agility
Agility 125 Regular maintenance intervals must be followed; let’s see how to change the engine oil on the Kymco Agility scooter, both 125 and 200 models. First, …
How to Replace the Engine Oil and Oil Filter of the Kymco Agility 125
How to Replace the Engine Oil and Oil Filter of the Kymco Agility 125
Agility 125 Follow these instructions to remove and replace the air filter and change the engine oil of the Kymco Agility 125 scooter. First, place your scooter …

How to replace the headlight bulbs on a Suzuki GSXR 600?

In this tutorial, you will see how to replace the headlight bulbs on a Suzuki GSXR 600, an extremely simple and quick operation. First, ensure that the key is not inserted, then unscrew the two indicated screws and separate the dashboard from the support. Next, disconnect the power connectors of the bulbs, remove the rubber caps, and unclip the metal clips to extract the bulbs from their respective housings. At this point, you can insert the replacements, avoiding touching the glass directly with your bare hands, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos