Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kymco
    3. : Agility 125

Kymco Agility 125 - Video guides

Kymco Agility 125
How to remove the front shield of the Kymco Agility
In this video, we will see how to change or remove the front shield of the Kymco Agility: first, we need to remove the three screws that we find by looking …Read all…
Posted on 15 September 2025 by ScegliAuto
Kymco Agility 125
How to replace the rear brake pads of the Kymco Agility
The steps to replace the brake pads of the Kymco Agility are as follows: The first step is to unscrew the four 12mm screws on the rear frame with the help of …Read all…
Posted on 22 July 2025 by ScegliAuto
Kymco Agility 125
How to replace the belt of the Kymco Agility 125
Today with the help of the following video tutorial, we will explain how to replace the transmission belt of the Kymco Agility 125. We start the replacement by …Read all…
Posted on 12 May 2025 by ScegliAuto
Kymco Agility 125
How do you replace the front headlight bulb of the Kymco Agility 125?
In order to replace the headlight bulb of the Kymco Agility 125, you need to loosen the screws that secure the front fairing to its seat: by doing so, it will …Read all…
Posted on 18 December 2024 by ScegliAuto
Kymco Agility 125
How do you set the clock on the Kymco Agility?
The clock adjustment on the Kymco Agility is done by inserting the key into the lock so that it can be turned to turn on the dashboard: once the dashboard is …Read all…
Posted on 5 December 2024 by ScegliAuto
Kymco Agility 125
How to change the motor oil on the Kymco Agility City 125
In this video, we are shown how to change the engine oil on the Kymco Agility City 125. The procedure is simple and requires little time to be completed. …Read all…
Posted on 19 September 2024 by ScegliAuto
Kymco Agility 125
How do you replace the exhaust pipe of the Kymco Agility 125?
In order to replace the exhaust pipe of the Kymco Agility 125, you need to loosen the screws of the supports that fix it to its housing so that it can be …Read all…
Posted on 30 May 2024 by ScegliAuto
Kymco Agility 125
Disassembly of the exhaust on Kymco Agility 125
Preparation: Make sure the motorcycle is turned off and the center stand is positioned correctly. Ensure that the motorcycle is stable and secure. Remove the …Read all…
Posted on 23 May 2024 by ScegliAuto
Kymco Agility 125
How to Set the Clock on the Kymco Agility?
To set the clock on the Kymco Agility 125, press and hold the buttons located at the bottom of the instrument panel after turning the ignition key to switch it …Read all…
Posted on 21 September 2026 by ScegliAuto
Kymco Agility 125
How to Reset the Service on a Kymco Agility 125 Scooter
In this tutorial, we will see how to reset the service on a Kymco Agility 125 scooter, a very simple and quick operation. Before proceeding, ensure you have …Read all…
Posted on 21 September 2026 by ScegliAuto
Kymco Agility 125
How to Change the Engine Oil in the Kymco Agility City 125?
The method for replacing the engine oil on a scooter, in this case the Kymco Agility City 125, is similar to that used in cars. The difference lies in the ease …Read all…
Posted on 5 September 2026 by ScegliAuto
Kymco Agility 125
How to Remove the Engine from a Kymco Agility 125?
To remove the engine from a Kymco Agility 125, you need to loosen the screws that secure the mounts allowing it to be installed in its housing. Once these …Read all…
Posted on 31 August 2026 by ScegliAuto
Kymco Agility 125
Resetting the Oil Warning Light on Kymco Agility 125
In this brief yet useful video tutorial, you can see the entire procedure required to reset the oil change warning light on your Kymco Agility 125. This …Read all…
Posted on 22 August 2026 by ScegliAuto
Kymco Agility 125
How to Reset the Service Light on a Kymco Agility 125
Today, we will go through the procedure to reset the service light on a Kymco Agility R16+. Start the operation by turning on the ignition without starting the …Read all…
Posted on 15 August 2026 by ScegliAuto
Kymco Agility 125
How to Replace the Rear Indicator Bulb on a Kymco Agility 125?
To replace the rear indicator bulb on the Kymco Agility, open the under-seat compartment to access all the screws securing the rear fairing. This fairing can …Read all…
Posted on 14 August 2026 by ScegliAuto
Kymco Agility 125
How to replace the belt on a Kymco Agility 125
This guide shows how to remove and replace the transmission belt on a Kymco Agility 125 scooter. First, place the scooter on its centre stand and start …Read all…
Posted on 3 August 2026 by ScegliAuto
Kymco Agility 125
How to Replace the Engine Oil and Oil Filter of the Kymco Agility 125
Follow these instructions to remove and replace the air filter and change the engine oil of the Kymco Agility 125 scooter. First, place your scooter on the …Read all…
Posted on 31 July 2026 by ScegliAuto
Kymco Agility 125
How to change the engine oil on a Kymco Agility 125 scooter?
In this tutorial, you can see how to change the engine oil on a Kymco Agility 125 scooter, a very simple and quick operation to perform every 12 months. First, …Read all…
Posted on 17 July 2026 by ScegliAuto
Kymco Agility 125
How to replace the spark plug on the Kymco Agility 125?
To replace the spark plug on the Kymco Agility 125, loosen the screws securing the panel located at the rear of the footwell. This panel can be removed by …Read all…
Posted on 13 July 2026 by ScegliAuto
Kymco Agility 125
Engine Oil and Gear Oil Change for the Kymco Agility 125
Discover how to perform routine maintenance by changing the engine oil and gear oil on the Kymco Agility 125 scooter. First, place the scooter on its centre …Read all…
Posted on 6 July 2026 by ScegliAuto

See also:

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos