Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Follow these instructions to remove and replace the air filter and change the engine oil of the Kymco Agility 125 scooter. First, place your scooter on the centre stand and begin to unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Next, unscrew the screws of the air filter box cover, removing and replacing the cartridge with a new one, as shown in the video. Finally, pour in the new engine oil by unscrewing the filler cap and adding the correct amount.

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in the Kymco Agility City 125?
How to Change the Engine Oil in the Kymco Agility City 125?
Agility 125 The method for replacing the engine oil on a scooter, in this case the Kymco Agility City 125, is similar to that used in cars. The difference lies i…
How to Change the Engine Oil on the Kymco Agility
How to Change the Engine Oil on the Kymco Agility
Agility 125 Regular maintenance intervals must be followed; let’s see how to change the engine oil on the Kymco Agility scooter, both 125 and 200 models. First, …
How to Change the Engine Oil on the Kymco Agility 125 Scooter?
How to Change the Engine Oil on the Kymco Agility 125 Scooter?
Agility 125 In this tutorial, you will learn how to change the engine oil on the Kymco Agility 125 scooter, a simple task to perform every 3,000 miles. First, en…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos