Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Want to change the oil on your Agility scooter? Let's see how to replace the oil. Lift the scooter using the centre stand, and with a socket spanner, unscrew the large tightening bolt of the container cap where the oil filter is located. Remove the oil filter and clean it. Screw the oil filter back on after changing the oil. Unscrew the oil bolt and let it drain into a container, then screw the drain bolt back on, ensuring it fits snugly against the engine walls. Finally, top up the engine with the new oil recommended by the manufacturer.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil on a Kymco Agility 125 scooter?
How to change the engine oil on a Kymco Agility 125 scooter?
Agility 125 In this tutorial, you can see how to change the engine oil on a Kymco Agility 125 scooter, a very simple and quick operation to perform every 12 mont…
How to Change the Gear Oil on a Kymco Agility 125 R16
How to Change the Gear Oil on a Kymco Agility 125 R16
Agility 125 In this tutorial, you will find instructions for changing the gear oil on a Kymco Agility 125 scooter by following these simple steps. First, positio…
How to Change the Engine Oil on the Kymco Agility
How to Change the Engine Oil on the Kymco Agility
Agility 125 Regular maintenance intervals must be followed; let’s see how to change the engine oil on the Kymco Agility scooter, both 125 and 200 models. First, …

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos