Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Gear Oil on a Kymco Agility 125 R16

Model: Kymco Agility 125
Part: Transmission fluid

Video tutorial

In this tutorial, you will find instructions for changing the gear oil on a Kymco Agility 125 scooter by following these simple steps. First, position your scooter on the centre stand and then unscrew the oil drain bolt located at the bottom on the left side of the casing using a 12 mm spanner.

After allowing the oil to drain for about ten minutes, replace the plug with its washer; then open the fill hole to introduce the new gear oil, filling it to the maximum level!


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Fit the Number Plate Light on the Kymco Agility 125 R16?
How to Fit the Number Plate Light on the Kymco Agility 125 R16?
Agility 125 To fit the number plate light on the Kymco Agility 125 R16, remove the screws securing the halogen light cover. To detach the light, simply rotate th…
Engine Oil and Gear Oil Change for the Kymco Agility 125
Engine Oil and Gear Oil Change for the Kymco Agility 125
Agility 125 Discover how to perform routine maintenance by changing the engine oil and gear oil on the Kymco Agility 125 scooter. First, place the scooter on its…
How to change the engine oil on a Kymco Agility 125 scooter?
How to change the engine oil on a Kymco Agility 125 scooter?
Agility 125 In this tutorial, you can see how to change the engine oil on a Kymco Agility 125 scooter, a very simple and quick operation to perform every 12 mont…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos