|
Do it yourself
| |||
| ||||
|
Model: Kymco Agility 125
To fit the number plate light on the Kymco Agility 125 R16, remove the screws securing the halogen light cover. To detach the light, simply rotate the casing clockwise and pull it out from the inside of the bike, where the mudguard is located. You will also need to disconnect the cables from the old bulb. Once the old bulb is removed from its housing, you can fit the new one by connecting it to the terminals and inserting it back into its place. Once the bulb is in, refit all the removed parts.
Updated on 20 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Agility 125
Today, we will go through the procedure to reset the service light on a Kymco Agility R16+. Start the operation by turning on the ignition without st…
Agility 125
In this tutorial, you will find instructions for changing the gear oil on a Kymco Agility 125 scooter by following these simple steps. First, positio…
Agility 125
To manually reset the oil light on your Kymco Agility 125, follow the instructions in this mini guide. First, insert the key and turn on the ignition…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
