Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, we will go through the procedure to reset the service light on a Kymco Agility R16+. Start the operation by turning on the ignition without starting the engine, then press the left button on the speedometer until the service screen appears, showing the maintenance interval in kilometres on the information display. At this point, press and hold both buttons on the speedometer for a few seconds until the light resets. Finally, restart the vehicle to verify the reset was successful.

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the Kymco Agility 125
How to Reset the Oil Light on the Kymco Agility 125
Agility 125 To manually reset the oil light on your Kymco Agility 125, follow the instructions in this mini guide. First, insert the key and turn on the ignition…
How to Reset the Oil Change Warning Light on a Kymco Agility 125
How to Reset the Oil Change Warning Light on a Kymco Agility 125
Agility 125 Before you start, sit on the seat of your Kymco Agility 125. Next, turn the key in the ignition switch to activate the instrument panel. Then, press …
How to Remove the Spark Plug from a Kymco Agility 125
How to Remove the Spark Plug from a Kymco Agility 125
Agility 125 Before you start, position your Kymco Agility 125 on the centre stand. Begin by removing the floor panel fairing by unscrewing the fixing screws. Nex…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos