Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Spark Plug from a Kymco Agility 125

Model: Kymco Agility 125
Part: Spark plugs

Video tutorial

Before you start, position your Kymco Agility 125 on the centre stand. Begin by removing the floor panel fairing by unscrewing the fixing screws.

Next, pull and disconnect the spark plug connector. This will give you access to the spark plug itself.

At this point, unscrew it using the appropriate spanner provided in the scooter's basic toolkit. Once you have unscrewed it, you can remove it. After completing this step, you will have successfully removed the spark plug.


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to replace the spark plug on the Kymco Agility 125?
How to replace the spark plug on the Kymco Agility 125?
Agility 125 To replace the spark plug on the Kymco Agility 125, loosen the screws securing the panel located at the rear of the footwell. This panel can be remov…
Where is the Spark Plug on the Kymco Agility 125 Scooter and How to Replace It?
Where is the Spark Plug on the Kymco Agility 125 Scooter and How to Replace It?
Agility 125 In this tutorial, you will see where the spark plug is located on the Kymco Agility 125 scooter and how to replace it. This is an extremely simple an…
How to Remove the Engine from a Kymco Agility 125?
How to Remove the Engine from a Kymco Agility 125?
Agility 125 To remove the engine from a Kymco Agility 125, you need to loosen the screws that secure the mounts allowing it to be installed in its housing. Once …

How to Replace the Front Headlamp Lens on the MV Agusta Brutale 1090R

In this brief guide, we will see the instructions for removing and replacing the headlamp lens on the MV Agusta Brutale 1098 R motorcycle. First, place the motorcycle on its stand and start by removing the front headlamp; to do this, unscrew its fixing screws and disconnect the bulb electrical connector. At this point, use a thin plastic lever to remove the headlamp lens, then replace it with the new one; secure it properly to the optical unit before refitting it to the motorcycle, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos