Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plug on the Kymco Agility City 125

Model: Kymco Agility 125
Part: Spark plugs

Video tutorial

To replace the spark plug on the Kymco Agility City 125, open the scooter seat, unscrew the 2 star screws holding the cover at the front below the seat and remove it. Once the cover is off, pull off the spark plug cap; insert the appropriate spark plug tool into the spark plug and use a screwdriver in the holes of the tool to turn it, then unscrew by hand and extract the spark plug.

After removing the old spark plug, take the new one and insert it using the spark plug tool, screwing it in first by hand and then turning it with the tool while inserting a screwdriver in the holes of the tool.

Replace the spark plug cap, reattach the cover below the seat by screwing in the star screws, and finally close the seat.


Updated on 13 May 2026 by ScegliAuto


Related tutorials

How to Remove the Spark Plug from a Kymco Agility 125
How to Remove the Spark Plug from a Kymco Agility 125
Agility 125 Before you start, position your Kymco Agility 125 on the centre stand. Begin by removing the floor panel fairing by unscrewing the fixing screws. Nex…
Replacing the Air Filter on a Kymco Agility City 125
Replacing the Air Filter on a Kymco Agility City 125
Agility 125 In today's video tutorial, you will learn how to remove and replace the air filter on a Kymco Agility City 125 scooter. First, locate the air filter …
How to replace the spark plug on the Kymco Agility 125?
How to replace the spark plug on the Kymco Agility 125?
Agility 125 To replace the spark plug on the Kymco Agility 125, loosen the screws securing the panel located at the rear of the footwell. This panel can be remov…

How to Replace the Coolant in a Honda CB 500F

In this short and simple guide, you will find step-by-step instructions on how to drain and refill the coolant in a Honda CB 500F motorcycle. First, place your motorcycle on a stand and start by unscrewing the drain screw for the antifreeze, located on the water pump casing; let the fluid drain into a container for about ten minutes. Next, unscrew the radiator cap to allow the fluid to drain more quickly; finally, refill with new fluid suitable for your radiator, filling until you reach the maximum level mark!

Watch the video!


by ScegliAuto

More videos