Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the spark plug on the Kymco Agility 125, loosen the screws securing the panel located at the rear of the footwell. This panel can be removed by unscrewing the screws found inside the underseat compartment. Once the panel is detached, you will be able to locate the top of the engine cylinder, where the coil is situated. Disconnect the coil, and the spark plug underneath can be extracted using a socket wrench. Then, insert the new spark plug, ensuring everything functions correctly.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Spark Plug from a Kymco Agility 125
How to Remove the Spark Plug from a Kymco Agility 125
Agility 125 Before you start, position your Kymco Agility 125 on the centre stand. Begin by removing the floor panel fairing by unscrewing the fixing screws. Nex…
Where is the Spark Plug on the Kymco Agility 125 Scooter and How to Replace It?
Where is the Spark Plug on the Kymco Agility 125 Scooter and How to Replace It?
Agility 125 In this tutorial, you will see where the spark plug is located on the Kymco Agility 125 scooter and how to replace it. This is an extremely simple an…
How to Replace the Spark Plug on the Kymco Agility City 125
How to Replace the Spark Plug on the Kymco Agility City 125
Agility 125 To replace the spark plug on the Kymco Agility City 125, open the scooter seat, unscrew the 2 star screws holding the cover at the front below the se…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos