Do it yourself
Frequently asked questions about cars and motorcycles
To manually reset the oil light on your Kymco Agility 125, follow the instructions in this mini guide. First, insert the key and turn on the ignition without starting the engine. Next, ensure that the total mileage is displayed and press the left button located just below the speedometer. Once the display starts flashing, hold both buttons for a few seconds and release them as soon as the light is reset. Finally, turn off the ignition.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Agility 125 Discover how to perform routine maintenance by changing the engine oil and gear oil on the Kymco Agility 125 scooter. First, place the scooter on its…
Agility 125 Before you start, sit on the seat of your Kymco Agility 125. Next, turn the key in the ignition switch to activate the instrument panel. Then, press …
Agility 125 In this tutorial, you will find instructions for changing the gear oil on a Kymco Agility 125 scooter by following these simple steps. First, positio…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos