Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Regular maintenance intervals must be followed; let’s see how to change the engine oil on the Kymco Agility scooter, both 125 and 200 models. First, place the scooter on the centre stand and start by unscrewing the drain bolt located under the engine using a socket spanner, allowing it to drain into a container for about ten minutes; then unscrew the filler cap and the dipstick. Now clean the small oil filter and top up with new engine oil, pouring in the correct amount!

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Oil on a Kymco Agility 125
How to Change the Oil on a Kymco Agility 125
Agility 125 Want to change the oil on your Agility scooter? Let's see how to replace the oil. Lift the scooter using the centre stand, and with a socket spanner,…
How to Change the Engine Oil on the Kymco Agility 125 Scooter?
How to Change the Engine Oil on the Kymco Agility 125 Scooter?
Agility 125 .. In this tutorial, you will learn how to change the engine oil on the Kymco Agility 125 scooter, a simple task to perform every 3,000 miles... …
How to Replace the Engine Oil and Oil Filter of the Kymco Agility 125
How to Replace the Engine Oil and Oil Filter of the Kymco Agility 125
Agility 125 Follow these instructions to remove and replace the air filter and change the engine oil of the Kymco Agility 125 scooter. First, place your scooter …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos