Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Agility 125
Part:

Today with the help of the following video tutorial, we will explain how to replace the transmission belt of the Kymco Agility 125. We start the replacement by unscrewing the fixing screws of the casing with an 8mm wrench and after removing it, we unscrew the central nut and access the belt. Loosen the tensioning nut and remove the belt. Insert the new belt and tighten the nut. Insert and screw the previously removed elements and once inserted, close the casing and screw the screw. Finish by starting the engine to test the operation of the new belt.

Posted on 12 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Drive Belt on the Kymco Agility 125
How to Replace the Drive Belt on the Kymco Agility 125
Agility 125 In this video tutorial, you will learn how to remove and replace the drive belt on the Kymco Agility 125 scooter, following the instructions below. F…
How to replace the belt on a Kymco Agility 125
How to replace the belt on a Kymco Agility 125
Agility 125 This guide shows how to remove and replace the transmission belt on a Kymco Agility 125 scooter. First, place the scooter on its centre stand and sta…
How to Set the Time on the Kymco Agility 125
Agility 125 In this guide for your Kymco Agility 125, discover how to manually set the time using the buttons on the central display. First, position your Agilit…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos