Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this brief yet useful video tutorial, you can see the entire procedure required to reset the oil change warning light on your Kymco Agility 125. This operation is very simple to carry out and can be done independently after changing the engine oil in the vehicle. Start by turning on the ignition without starting the engine, then press the left button on the speedometer until the oil change warning light and the corresponding mileage are displayed. Next, press and hold both buttons on the speedometer until the reset is completed.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Gear Oil Change for the Kymco Agility 125
Engine Oil and Gear Oil Change for the Kymco Agility 125
Agility 125 Discover how to perform routine maintenance by changing the engine oil and gear oil on the Kymco Agility 125 scooter. First, place the scooter on its…
How to Change the Gear Oil on a Kymco Agility 125 R16
How to Change the Gear Oil on a Kymco Agility 125 R16
Agility 125 In this tutorial, you will find instructions for changing the gear oil on a Kymco Agility 125 scooter by following these simple steps. First, positio…
How to Change the Engine Oil on the Kymco Agility
How to Change the Engine Oil on the Kymco Agility
Agility 125 Regular maintenance intervals must be followed; let’s see how to change the engine oil on the Kymco Agility scooter, both 125 and 200 models. First, …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos