Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Indicator Bulb on a Kymco Agility 125?

Model: Kymco Agility 125
Part: Tail light bulb

Video tutorial

To replace the rear indicator bulb on the Kymco Agility, open the under-seat compartment to access all the screws securing the rear fairing. This fairing can then be removed by loosening the screws that hold it in place.

Once the rear fairing is removed, you can loosen the screws securing the rear indicator lights, disconnect them, and remove the bulbs inside. Replace them with new spare parts and reassemble all previously removed components.


Updated on 14 August 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlight Bulb on a Kymco Agility 125
Replacing the Front Headlight Bulb on a Kymco Agility 125
Agility 125 In this video tutorial, see how to remove and replace the front headlight bulb on a 2014 Kymco Agility 125 scooter in simple steps. First, remove all…
How to Replace the Headlight Bulb of the Kymco Agility 125
How to Replace the Headlight Bulb of the Kymco Agility 125
Agility 125 To replace the headlight bulb of the Kymco Agility 125, you need to loosen the two screws located at the top of the front fairing, just below the han…
How do you replace the front headlight bulb of the Kymco Agility 125?
How do you replace the front headlight bulb of the Kymco Agility 125?
Agility 125 In order to replace the headlight bulb of the Kymco Agility 125, you need to loosen the screws that secure the front fairing to its seat: by doing so…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos