Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Front Headlight Bulb on a Kymco Agility 125

Model: Kymco Agility 125
Part: Headlight bulb

Video tutorial

In this video tutorial, see how to remove and replace the front headlight bulb on a 2014 Kymco Agility 125 scooter in simple steps. First, remove all the screws on the rear shield using a star screwdriver; then remove the rear wheel arch by taking out the plastic rivets, and remove the front panel.

Now unscrew the screws of the headlight and remove it: then take off the protective cap of the bulb and disconnect the electrical connector. Finally, remove the old bulb and replace it with the new one of the correct type.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

Agility 125 In order to replace the headlight bulb of the Kymco Agility 125, you need to loosen the screws that secure the front fairing to its seat: by doing so…
Agility 125 To replace the headlight bulb of the Kymco Agility 125, you need to loosen the two screws located at the top of the front fairing, just below the han…
Agility 125 As shown in this tutorial, replacing the front headlight bulb on a Kymco Agility scooter is an extremely simple and quick task. First, ensure that th…

How to Set the Time on a Suzuki Burgman 650 Scooter?

In this tutorial, you will learn how to set the time on a Suzuki Burgman 650 scooter, a very simple and quick operation to perform after disconnecting the battery or when switching to daylight saving time. First, insert the key, then turn on the instrument panel and press the two buttons located below the display until the clock starts to flash. At this point, adjust the hour using the "Select" button, set the minutes with the "Adjust" button, and save the setting by pressing both buttons again.

Watch the video!


by ScegliAuto

More videos