Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
As shown in this tutorial, replacing the front headlight bulb on a Kymco Agility scooter is an extremely simple and quick task. First, ensure that the key is not inserted, then remove all indicated plastic rivets and unscrew the screws located at the rear of the front fairing. Next, separate the fairing, unscrew the headlight mounting bolts, and disconnect the power connector. At this point, remove the rubber cap, disconnect the additional connector, and remove the bulb by releasing the metal clip. To reassemble everything, simply follow the reverse procedure.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlight Bulb on a Kymco Agility 125
Replacing the Front Headlight Bulb on a Kymco Agility 125
Agility 125 In this video tutorial, see how to remove and replace the front headlight bulb on a 2014 Kymco Agility 125 scooter in simple steps. First, remove all…
How do you replace the front headlight bulb of the Kymco Agility 125?
How do you replace the front headlight bulb of the Kymco Agility 125?
Agility 125 In order to replace the headlight bulb of the Kymco Agility 125, you need to loosen the screws that secure the front fairing to its seat: by doing so…
How to Replace the Headlight Bulb of the Kymco Agility 125
How to Replace the Headlight Bulb of the Kymco Agility 125
Agility 125 To replace the headlight bulb of the Kymco Agility 125, you need to loosen the two screws located at the top of the front fairing, just below the han…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos