Do it yourself
Frequently asked questions about cars and motorcycles

Model: Kymco Agility 125
Part: Engine

To remove the engine from a Kymco Agility 125, you need to loosen the screws that secure the mounts allowing it to be installed in its housing. Once these screws are loosened, you can disconnect all the hoses and connectors. At this point, proceed by loosening the screws that secure the cylinder, removing it along with the spark plug. Now you can detach the piston from its connecting rod and access the further internal components, replacing them with new spare parts if necessary.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Agility 125 In this guide for your Kymco Agility 125, discover how to manually set the time using the buttons on the central display. First, position your Agilit…
Agility 125 Regular maintenance intervals must be followed; let’s see how to change the engine oil on the Kymco Agility scooter, both 125 and 200 models. First, …
Agility 125 In this tutorial, you will see where the spark plug is located on the Kymco Agility 125 scooter and how to replace it. This is an extremely simple an…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos