Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
How do you change the air filter leading to the engine on a Kymco People S125? Follow this guide to proceed with the replacement. Position the scooter on the centre stand, and using a screwdriver, unscrew the securing screws of the air filter container (left side). After removing the securing screws from the container, uncover the cap and remove the air filter. Install a new one if damaged, or reposition the same filter after cleaning it (blow with air). Finally, close the air filter container and tighten the screws with the screwdriver.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Engine Air Filter on a Kymco People S 125
How to Remove the Engine Air Filter on a Kymco People S 125
People S 125 How to remove the engine air filter on a Kymco People S 125? Follow this guide to replace it. Position the scooter on the central stand, and using a …
How to Replace the Engine Oil, Oil Filter, and Air Filter on the Kymco People S 125
How to Replace the Engine Oil, Oil Filter, and Air Filter on the Kymco People S 125
People S 125 These brief and simple steps will illustrate the procedure for replacing the engine oil, oil filter, and air filter on the Kymco People S 125 scooter…
How to Replace the Air Filter in a Kymco People S 125?
How to Replace the Air Filter in a Kymco People S 125?
People S 125 To replace the air filter in a Kymco People S 125, open the cover above the transmission by loosening the securing screws. Once these screws are loos…

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos