Do it yourself
Frequently asked questions about cars and motorcycles
To replace the lambda sensor on the Kymco Agility 125, open the under-seat compartment to access the underlying components: here you will find the glove box, which must be cleared of the corresponding screws to completely remove the drawer. Doing this will allow you to locate the sensor connected at the top of the exhaust terminal: you will need to free it from the corresponding nut and disconnect it from its connector. This way, you can insert the new sensor, connecting it to the connector and securing it in its place to verify its operation.

Posted on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Agility 125 In order to replace the exhaust pipe of the Kymco Agility 125, you need to loosen the screws that hold it to the appropriate supports near the rear w…
Agility 125 Today we will discover the instructions that will allow us to replace the engine oil and air filter of the Kymco Agility 125 scooter, performing rout…
Agility 125 To replace the rear shock absorber on a Kymco Agility 125, loosen the screws securing the component to its housing. These will be located at the top …

How to replace the engine oil in the Kawasaki Versys 1000?

As we can see in this tutorial, replacing the motor oil in the Kawasaki Versys 1000 is an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then position a container under the motorcycle and, using a socket wrench, unscrew the drain plug. Wait for all the oil in the system to completely drain out, remove the lower front cover and unscrew the old filter. At this point, we can tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos