Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
You can replace the engine oil in the Kymco Like 150i by unscrewing the drain plug located at the central lower part of the vehicle: once this plug has been removed, you can proceed to let all the used oil flow into an appropriately positioned container. At this point, you can remove the oil filter located in the same position to replace it with a new one. You can then continue with topping up by pouring the necessary amount of oil through the breather on the right side of the scooter.

Posted on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil and transmission oil of the Kymco Like 150i
How to change the engine oil and transmission oil of the Kymco Like 150i
Like 150i This guide briefly outlines the instructions for performing routine maintenance by changing the engine oil and transmission oil on the Kymco Like 150…
How to Change the Engine Oil of the Kymco Like 150i
How to Change the Engine Oil of the Kymco Like 150i
Like 150i This guide explains how to change the engine oil while performing regular maintenance on the Kymco Like 150i scooter. First, place the scooter on its…
How to Change the Engine Oil of the Kymco Like 150i?
How to Change the Engine Oil of the Kymco Like 150i?
Like 150i You can change the engine oil of the Kymco Like 150i by loosening the drain plug located at the central lower part of the vehicle: once this plug is …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos