Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the Kymco Like 150i

Model: Kymco Like 150i
Part: Engine oil

Video tutorial

This guide explains how to change the engine oil while performing regular maintenance on the Kymco Like 150i scooter. First, place the scooter on its centre stand and start by unscrewing the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes; then clean the small mesh oil filter and screw the cap back on. At this point, unscrew the filler screw and top up with oil of the correct viscosity (as indicated in the manual)!


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Kymco Like 150i?
How to Change the Engine Oil of the Kymco Like 150i?
Like 150i You can change the engine oil of the Kymco Like 150i by loosening the drain plug located at the central lower part of the vehicle: once this plug is …
How to change the engine oil and transmission oil of the Kymco Like 150i
How to change the engine oil and transmission oil of the Kymco Like 150i
Like 150i This guide briefly outlines the instructions for performing routine maintenance by changing the engine oil and transmission oil on the Kymco Like 150…
How to change the engine oil on the Kymco Like 150i
How to change the engine oil on the Kymco Like 150i
Like 150i Today's instructions will show you how to perform routine maintenance by changing the engine oil on the Kymco Like 150i scooter. First, place the sco…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos