Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the front headlamp bulb on a Kymco Agility, you will need to remove the headlamp and the entire surrounding fairing. Above the headlamp, in the centre of the fairing, you will notice a plastic cap integrated into it; this must be removed using a screwdriver to access the screw underneath. After removing the screw in the centre of the fairing, remove three more screws located under the headlamp and two that secure the upper part of the fairing to the inner shield beneath the steering. Once all six screws are removed, the entire fairing with the headlamp should come away easily, providing access to the rear of the headlamp. At this point, you will see a rubber cover protecting the bulb; this must be removed to access the power connector, which can then be disconnected. Once the connector is detached, you can release the metal clip and replace the bulb with a new one, then reassemble everything in the reverse order of disassembly.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlight Bulb on a Kymco Agility 125
Replacing the Front Headlight Bulb on a Kymco Agility 125
Agility 125 In this video tutorial, see how to remove and replace the front headlight bulb on a 2014 Kymco Agility 125 scooter in simple steps. First, remove all…
How to Replace the Front Headlight Bulb on a Kymco Agility Scooter?
How to Replace the Front Headlight Bulb on a Kymco Agility Scooter?
Agility 125 As shown in this tutorial, replacing the front headlight bulb on a Kymco Agility scooter is an extremely simple and quick task. First, ensure that th…
How do you replace the front headlight bulb of the Kymco Agility 125?
How do you replace the front headlight bulb of the Kymco Agility 125?
Agility 125 In order to replace the headlight bulb of the Kymco Agility 125, you need to loosen the screws that secure the front fairing to its seat: by doing so…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos