Do it yourself
Frequently asked questions about cars and motorcycles
In this video tutorial, you will learn how to remove and replace the battery of a Kymco People 200 S scooter. To access the battery, first remove the plastic cover of the footwell at the top by prying it off; this will give you access to the battery compartment. Next, unscrew the bolts of the battery terminals (positive and negative) and remove the old battery by pulling it upwards; simply replace it with the new one of the correct type and reconnect the two terminals. Then, replace the footwell cover and check the operation of the scooter!

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

People S 200 To replace the rear-view mirror on the Kymco People S 200, loosen the screws that secure the windscreen. These screws are located at the front of the…
People S 200 Let’s go through the guide on how to drain and replace the transmission oil on the Kymco People S 200 scooter, following the instructions below. Firs…
People S 200 To change the engine oil on the Kymco People S 200, loosen the oil drain plug located at the bottom of the scooter, just beneath the footrest area. O…

How to Change the Engine Oil in the Yamaha FZ V 2.0?

As shown in this tutorial, changing the engine oil in the Yamaha FZ V 2.0 is an extremely simple and quick task. First, ensure the engine is completely cold, then position a container underneath and, using a 17mm spanner, loosen the drain plug. Once all the oil has drained from the system, proceed by opening the filter housing with an 8mm socket and replacing the filter. Finally, reassemble everything and add new oil through the upper fill hole.

Watch the video!


by ScegliAuto

More videos