Do it yourself
Frequently asked questions about cars and motorcycles
Let’s go through the guide on how to drain and replace the transmission oil on the Kymco People S 200 scooter, following the instructions below. First, place your scooter on the centre stand and start unscrewing the oil drain bolt located under the transmission cover, allowing it to drain into a container for about ten minutes. Next, unscrew the filler cap situated at the top of the cover to let the oil drain out more quickly. Finally, top up with new gear oil, pouring in the correct amount!

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

People S 200 In order to replace the gear oil of the Kymco People S 200, you need to loosen the screws that secure the transmission casing located on the rear sid…
People S 200 To change the engine oil on the Kymco People S 200, loosen the oil drain plug located at the bottom of the scooter, just beneath the footrest area. O…
People S 200 Today, you will learn how to change the engine oil on your Kymco People S. Gather a 17 mm socket spanner, a fixed lever, an extension, a container fo…

How to Replace the Exhaust on a Derbi GPR 50?

To replace the exhaust on the Derbi GPR 50, loosen the screws that secure the exhaust end can to the supports. Once the old exhaust is freed from its supports, proceed to remove the connecting clamp that joins the end can to the exhaust manifold. This will allow you to completely remove the old exhaust and insert the new one: the new exhaust can now be connected and installed in its place to ensure everything functions correctly after the replacement.

Watch the video!


by ScegliAuto

More videos