Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kymco
    3. :
  3. People S 200
    4. : How do you replace the gear oil of the Kymco People S 200?

Model: Kymco People S 200
Part: Gear oil
How do you replace the gear oil of the Kymco People S 200?

In order to replace the gear oil of the Kymco People S 200, you need to loosen the screws that secure the transmission casing located on the rear side of the motorcycle, on the left side: by loosening the casing, you will be able to locate the drain plug underneath. This way, the plug can be loosened and it will be possible to collect all the used oil inside a properly positioned container. Once all the oil has drained out, you can pour in the new oil through the vent located slightly above the drain plug, so that the necessary amount of oil is inserted.


Posted on 17 May 2024 by ScegliAuto



How to change the gearbox oil of the Kymco People S 200
People S 200 Let's find out the guide on how to drain and replace the transmission oil of the Kymco People S 200 scooter, by following the instructions below. Fir
How to change the engine oil of the Kymco People S 200?
People S 200 In order to change the engine oil of the Kymco People S 200 you need to loosen the oil drain plug located in the lower part of the bike, immediately
Kymco People S 200 battery replacement
People S 200 In this video tutorial we will see how to remove and replace the battery of a Kymco People 200 S scooter. To access the battery we will first of all

Change the battery to a Vespa 125 GTS

To change the battery on our Vespa 125, let's start by removing the platform that covers the battery compartment, fixed by 4 screws. Then we remove the two screws that secure the battery to the floor. Now we can see the battery poles: we always remove the black one, the negative one, first. We can take out the battery. For a better grip of the bolts, insert a small piece of plastic where they will be inserted. Put it back in its housing, reattach the positive pole and then the negative one. Secure the battery to the floor with its two screws. Replace the footboard covering the battery compartment. Job finished.

Watch the video!


by ScegliAuto

More videos