Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this short guide, you will learn how to replace the brake pads on your Kymco People 200. It is not a very complex task; just take some care and you can do it without needing a specialist. First, take an Allen key and remove the bolts located on the side of the brake caliper to unlock it. Once done, you can unscrew the bolts that hold the brake pads in place. After removing the pads, push the pistons back to allow for the new pads to fit. Refit the bolts to secure the new pads in place and reattach the caliper to the disc.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Brake Pads on Kymco People S
How to Replace Brake Pads on Kymco People S
People S 200 Today, you will learn how to change the brake pads on your Kymco People S scooter. Remove the brake caliper to access the pads. Start by undoing the …
Replacing the Battery on Kymco People S 200
Replacing the Battery on Kymco People S 200
People S 200 In this video tutorial, you will learn how to remove and replace the battery of a Kymco People 200 S scooter. To access the battery, first remove the…
How to Change the Gear Oil on a Kymco People S 200
How to Change the Gear Oil on a Kymco People S 200
People S 200 Let’s go through the guide on how to drain and replace the transmission oil on the Kymco People S 200 scooter, following the instructions below. Firs…

How to Reset the Service on the Husqvarna FE 350?

In this tutorial, you will see how to reset the service on the Husqvarna FE 350, a very simple and quick operation. Before proceeding, ensure you have completed all required scheduled maintenance tasks. Start by inserting the key and turning on the instrument panel; it is not necessary to start the engine. Then, repeatedly press the button located to the right of the display until you reach the odometer reading "ODO". Once done, press and hold the opposite button for about 5 seconds, and when the screen changes, press the right button again.

Watch the video!


by ScegliAuto

More videos