Do it yourself
Frequently asked questions about cars and motorcycles
Today, you will learn how to change the brake pads on your Kymco People S scooter. Remove the brake caliper to access the pads. Start by undoing the bolts located at the front of the caliper. Once removed, retract the pistons completely and take out the old pads. Insert the new pads, ensuring they are properly seated in the caliper to avoid malfunction. Now, refit the brake caliper onto the disc by simply tightening the bolts you removed earlier.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

People S 200 In this short guide, you will learn how to replace the brake pads on your Kymco People 200. It is not a very complex task; just take some care and yo…
People S 200 To replace the rear-view mirror on the Kymco People S 200, loosen the screws that secure the windscreen. These screws are located at the front of the…
People S 200 Let’s go through the guide on how to drain and replace the transmission oil on the Kymco People S 200 scooter, following the instructions below. Firs…

How to Replace the Horn on a Kawasaki Z800

Follow the main steps to remove and replace the horn or acoustic warning device on the Kawasaki Z800 motorcycle. First, place the bike on a stand and start unscrewing the screws of the horn, located behind the radiator; then disconnect the electrical connector, as shown in the video. At this point, remove and replace the acoustic warning device with the new one, making the connection and checking its operation; then secure it to the bracket behind the cooling radiator, following the video tutorial until the end!

Watch the video!


by ScegliAuto

More videos